Baumer BA DenexMicro Manuel d'utilisateur télécharger pdf (Page 8)

User Manual DENEX MICRO 8/24 Baumer Electric AG

Version 2013-02, V1.6 www.baumer.com Frauenfeld, Switzerland

4.4 Mounting with a hole for the laser

If there are mechanical parts 200-300 mm under the sensor that can cause reflections to

the detectors, the following mounting is recommended. It requires a small hole on the

conveyor, or a plate with a hole to screen off the reflection from the parts. The beam must

still be stopped with a dark plate or other material if there is any risk for a person to look

into the laser. Make sure that the laser goes through the hole properly. Normal back-edges

are not counted with this mounting.

Figure 4.4.1 Mounting with a hole to let the laser through.

100

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Pas de commentaire

Baumer BA DenexMicro Manuel d'utilisateur Page 8