Baumer POG 11 + ESL (version B10) Manuel d'utilisateur télécharger pdf (Page 32)

 29

Baumer_POG11-ESL_II_DE-EN (14A2)

MB070.2 - 11055675

9 Technical data

9.1 Technical data - electrical ratings

• Interference immunity: EN 61000-6-2:2005

• Emitted interference: EN 61000-6-3:2007/A1:2011

9.2 Technical data - electrical ratings (encoder)

• Voltage supply: 9...30 VDC* (HTL-P, TTL - version R)

5 VDC ±5 % (TTL)

• Consumptionw/oload: ≤100mA

• Pulses per revolution: 300...5000 (As ordered)

• Phase shift: 90° ±20°

• Scan ratio: 40...60 %

• Reference signal: Zero pulse, width 90°

• Outputfrequency:  ≤120kHz

  ≤300kHzoption

• Output signals: K1, K2, K0 + inverted

Error output (only EMS)

• Output stages: HTL-P (power linedriver)

TTL/RS422

(As ordered)

• Sensing method: Optical

9.3 Technical data - electrical ratings (speed switches)

• Switchingaccuracy: ±4%(≤1500rpm)

±2 % (>1500 rpm)

• Switchinghysteresis: ≤30%ofswitchingspeed

• Switchingdelaytime: ≤40ms

POG 11 + ESL 90

• Switching outputs: 1 output, speed control

• Outputswitchingcapacity: ≤6A/250VAC

  ≤1A/48VDC

• Minimum switching current: 100 mA

POG 11 + ESL 93

• Voltage supply: 12 VDC ±10 %

• Consumptionw/oload: ≤5mA

• Switching outputs: 3 outputs, speed control

• Current each output: 40 mA (DC)

* The voltage supply is 9...26 VDC at TTL - version R for versions <95 pulses per revolution

1 2 ... 27 28 29 30 31 32 33 34 35 36

Pas de commentaire

Baumer POG 11 + ESL (version B10) Manuel d'utilisateur Page 32